Heteroleptic [Cu(NN)P2]+-type cuprous complexes and their structural modulation on phosphorescent color: Synthesis,structural characterization,properties, and theoretical calculations

Four new heteroleptic [Cu(NN)P₂]⁺-type cuprous complexes— 1 -TPP, 2 -POP, 3 -Xantphos, and 4 -DPPF—were designed and synthesized using a diimine ligand 2-(2′-pyridyl)benzoxazole (2-PBO) and different phosphine ligands (TPP, triphenylphosphine; POP, bis[2-(diphenylphosphino)phenyl]ether; Xantphos, 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene; DPPF, 1,1′-bis(diphenylphosphino)-ferrocene). All complexes were characterized using single-crystal X-ray diffraction, spectroscopic analysis (infrared, UV–Vis.), elemental analysis, and photoluminescence (PL). Single-crystal X-ray diffraction revealed complexes 1 – 4 as isolated cation complex structures with a tetrahedral CuN₂P₂ coordination geometry and diverse P–Cu–P angles. Their UV–Vis. absorption spectra exhibited a blue-shift sequence in wavelength with an enlarged P–Cu–P angle from 4 to 2 then to 3 and then to 1 . The PL emission peaks of 1 – 3 also exhibited a similar blue-shift sequence ( 2 → 3 → 1 ). Their PL lifetime in microseconds (~7.5, 5.1, and 4.7 μs for 1 , 2 , and 3 , respectively) indicated that their PL behavior represents phosphorescence. Time-dependent density functional theory (TD-DFT) calculation and wavefunction analysis revealed that S₁ and T₁ states of 1 – 3 should be assigned as metal–ligand and ligand–ligand charge-transfer (ML + L'L)CT states. Their UV–Vis. absorption and phosphorescence should be attributed to the charge transfer from the P–Cu–P segment to the 2-PBO ligand. Therefore, as the P–Cu–P angle increased (lower HOMO), the energy of S₁ and T₁ states also increased, following the change of PL color.     

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

含水合物沉积物多相渗流特性研究进展

天然气水合物作为一种储量大、无污染的清洁能源近些年受到了广泛关注. 近20年来,中国进行了较大范围的陆海域天然气水合物储层勘探与储量预测.2017年,中国地质调查局牵头对南海神狐海域的天然气水合物进行了基于降压渗流原理的试验性开采.国内外已进行的水合物试采工程面临着气体产量低、出砂较多等问题,其最主要的原因之一是开发过程中沉积物内复杂多相渗流机理尚不明晰.本文综述了平行毛细管模型、Kozeny模型等广泛应用于天然气水合物开发渗流分析的理论模型,对比分析了水合物开发多尺度渗流过程模拟方法,简述了国内外含水合物沉积物渗透率测试、渗流过程中沉积物物性演变以及水合物开采室内模拟等方面的渗流实验进展,总结了矿场尺度的天然气水合物储层开采过程中产气数值模拟手段,展望了多相渗流模型、储层原位含水合物样品室内测试及结构与物性演化、矿场尺度数值模拟与水平井压裂技术等应用研究的未来方向与挑战.      

Generation and characterization of air micro-bubbles in highly hydrophobic capillaries

The generation of air microbubbles in microfluidic systems or in capillaries could be of great interest for transportation (single cell analysis, organite transportation) or for liquid compartmentation. The physicochemical characterization of air bubbles and a better understanding of the process leading to bubble generation during electrophoresis is also interesting in a theoretical point of view. In this work, the generation of microbubbles on hydrophobic Glaco™ coated capillaries has been studied in water-based electrolyte. Air bubbles were generated at the detection window and the required experimental parameters for microbubbles generation have been identified. Generated bubbles migrated against the electroosmotic flow, as would do strongly negatively charged solutes, under constant electric field. They have been characterized in terms of dimensions, electrophoretic mobility, and apparent charge.     

Determination of sugars and cyclitols isolated from various morphological parts of Medicago sativa L

Plant research interest has increased all over the world, and a large body of evidence has been collected to show the huge potential of medicinal plants in various disease treatments. Medicago sativa L., known as alfalfa, is a rich source of biologically active components and secondary metabolites and was frequently used from the ancient times both as fodder crop and as a traditional medicine in the treatment of various diseases. Cyclitols, naturally occurring in this plant, have a particular interest for us due to their significant anti‐diabetic, antioxidant, anti‐inflammatory, and anti‐cancer properties. In the present study we revealed the isolation, the identification, and the quantification of some cyclitols and sugars extracted from different morphological parts of alfalfa plant. Soxhlet extraction and solid phase extraction were used as extraction and purification methods, while for the analyses derivatization followed by gas chromatography with mass spectrometry was involved. The obtained results showed significant differences in the quantities of cyclitols and sugars found in the investigated morphological parts, ranging between 0.02 and 13.86 mg/g of plant in case of cyclitols, and in the range of 0.09 and 40.09 mg/g of plant for sugars. However, roots have the richest part of cyclitols and sugars in contrast to the leaves.     

The Polymer Physics of Multiscale Charge Transport in Conjugated Systems

Conjugated polymers are promising candidates for next‐generation low‐cost flexible electronics. Field‐effect transistors comprising conjugated polymers have witnessed significant improvements in device performance, notably the field‐effect mobility, in the last three decades. However, to truly make these materials commercially competitive, a better understanding of charge‐transport mechanisms in these structurally heterogeneous systems is needed for providing systematic guides for further improvements. This review assesses the key microstructural features of conjugated polymers across multiple length scales that can influence charge transport, with special attention given to the underlying polymer physics. The mechanistic understanding from collective experimental and theoretical studies point to the importance of interconnected ordered domains given the macromolecular nature of the polymeric semiconductors. Based on the criterion, optimization to improve charge transport can be broadly characterized by efforts to (a) promote intrachain transport, (b) establish intercrystallite connectivity, and (c) enhance interchain coupling. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1559–1571     

PDα‐type distributed learning control for nonlinear fractional‐order multiagent systems

This paper considers the consensus tacking problem for nonlinear fractional‐order multiagent systems by presenting a PD^α‐type iterative learning control update law with initial learning mechanisms. The asymptotical convergence of the proposed distributed learning algorithm is strictly proved by using the properties of fractional calculus. A sufficient condition is derived to guarantee the whole multiagent system achieving an asymptotic output consensus. An illustrative example is given to verify the theoretical results.     

Direct and Fast Electrochemical Determination of Catechin in Tea Extracts using SWCNT‐Subphthalocyanine Hybrid Material

In this study, single walled carbon nanotubes (SWCNTs) were covalently functionalized by terminal ethynyl bearing subphthalocyanine (SubPc) to obtain a new hybrid material, viz. SWCNT‐SubPc (CS), via “click” reaction for the first time. The structural characterization and study of the electrochemical sensor properties of the CS hybrid material to catechin were carried out. A convenient and fast analytical method was offered for the determination of catechin. It was shown that the deposition of CS on the surface of a glassy carbon electrode (GCE) led to a 2.2 and 8‐fold increase in the differential pulse voltammetry (DPV) responses to catechin in Britton‐Robinson (BR) buffer solution (a pH of 3) in comparison with SWCNT‐modified and bare GCE, respectively. The dynamic range, detection and quantification limits of catechin were determined to be 0.1–1.5 μM, 13 nM and 43 nM, respectively. Selectivity of the suggested CS/GCE sensor was investigated on addition of a number of interfering metal ions, antioxidants and biomolecules. The applicability of the modified electrode for the detection of catechin in real tea samples such as green, rosehip fruit, Turkish and Indian black tea was demonstrated with the standard addition method. Along with the ease in fabrication and low prices, the proposed CS/GCE sensor was reproducible, selective, stable and sensitive to catechin in major types of tea samples.     

The maximum number of columns in supersaturated designs with

Cheng and Tang [Biometrika, 88 (2001), pp. 1169–1174] derived an upper bound on the maximum number of columns that can be accommodated in a two‐symbol supersaturated design (SSD) for a given number of rows () and a maximum in absolute value correlation between any two columns (). In particular, they proved that for (mod ) and . However, the only known SSD satisfying this upper bound is when . By utilizing a computer search, we prove that for , and . These results are obtained by proving the nonexistence of certain resolvable incomplete blocks designs. The combinatorial properties of the RIBDs are used to reduce the search space. Our results improve the lower bound for SSDs with rows and columns, for , and . Finally, we show that a skew‐type Hadamard matrix of order can be used to construct an SSD with rows and columns that proves . Hence, we establish for and for all (mod ) such that . Our result also implies that when is a prime power and (mod ). We conjecture that for all and (mod ), where is the maximum number of equiangular lines in with pairwise angle .